Lifestyle

Pune’s new Development Control Regulations: Small projects to benefit more

[ecis2016.org] The Pune Municipal Corporation has sanctioned new development control regulations, permitting higher floor space index in certain categories in non-congested areas. We examine how this will impact the real estate scenario in the city

The Pune Municipal Corporation recently sanctioned the new development control regulations (DCR), which allows for higher floor space index (FSI) in certain categories, in non-congested areas. Small developments are likely to benefit more from this higher FSI.

You are reading: Pune’s new Development Control Regulations: Small projects to benefit more

Major categories and permissible FSI

Category                Maximum permissible FSI Road width (in meters) Minimum plot area (in sq metres)
Transit-oriented development (TOD) zone along the proposed metro corridor (TOD zone will be delineated by the Pune Municipal Corporation, with the approval from the state government) 2.00 9m and up to 12m < 1,000
2.50 12m and up to 18m ≥ 1,000
3.00 18m and up to 24m ≥ 2,000
3.50 24m and up to 30m ≥ 3,000
4.00 30m and above ≥ 4,000
MHADA development and redevelopment projects 2.50            –      –
Housing for government staff 4.00 18m or above ≥ 4,000
3.00 12m and up to 18m      –
Information technology (IT) establishments 3.00           –       –
Griha or IGBC-certified green buildings 3% to 7%  extra FSI based on rating of the building

Read also : RERA should be exclusive legal forum for real estate complaints: CREDAI

[ecis2016.org] Pune’s suburbs transform the city’s property market

A few other provisions of the new DCR include:

  • Mixed-used developments of residential and commercial nature, may be permissible on a residential plot in the TOD zone.
  • Solid waste management mandatory for housing complexes, commercial establishments, hostels, hospitals with an aggregate built-up area of 4,000 sq m or more.

Impact on commercial developments

The metro route, a majority of which passes through the central business district (CBD) and off-CBD areas in Pune, will not fetch significant benefits for commercial and IT building developments, as limited land is available in these locations, thereby, limiting the floor plate sizes and the overall development potential. The IT sector already had up to 3.00 FSI under the most recent Maharashtra IT Policy. Hence, increase in FSI along the metro route, will not be of much use for larger establishments but it is an instrumental development for small-sized commercial projects. Moreover, increase in FSI should also go in conjunction with adequate infrastructure facilities being developed. The additional FSI is expected to aid redevelopment in the old city areas and more specifically in the residential segment and hopefully, could lead to lowering the average FSI cost for developers.

Regions that will be impacted by Pune’s new DCR

Read also : The Delhi Development Authority provides an FAQ section for the aam aadmi

The proposed Pune Metro runs through major commercial zones of the city, which include Deccan, Bund Garden (CBD), Aundh, Wakad, Hinjewadi, Pimpri-Chinchwad (north-west Pune), Yerwada, Kalyani Nagar, Viman Nagar and Kharadi (north-east Pune). Hinjewadi and Kharadi have a large concentration of IT establishments and are also one of the primary residential catchments in Pune. These micro-markets are likely to expand further, with augmented urban development aided by the rise in FSI.

However, as explained above, the primary beneficiary would be only the small commercial developments located along these corridors. In our opinion, the approved change in FSI norms will be a positive step for the city, if the current and the future infrastructure demand is kept in check, by focusing on development in the infrastructure sector.

Source: https://ecis2016.org/.
Copyright belongs to: ecis2016.org

Source: https://ecis2016.org
Category: Lifestyle

Debora Berti

Università degli Studi di Firenze, IT

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button